Uncategorized

The MP1676C offers a very compact solution to achieve 6A of continuous output current (IOUT) across a wide input supply range. The M1676C operates at a high efficiency across a wide IOUT load range based on MPS’s proprietary switching loss reduction technique and internal low on resistance (RDS(ON)) power MOSFETs. Adaptive constant-on-time (COT) control provides […]

The MP1653F offers a very compact solution that achieves 3A of continuous output current (IOUT) with excellent load and line regulation across a wide input voltage (VIN) range. The MP1653F is well-suited to support applications with a tight output voltage (VOUT) ripple. Constant-on-time (COT) control operation provides very fast transient response, easy loop design, and

HCM320Z integrates dual-mode Bluetooth (BLE and Classic Bluetooth) technology, supporting AT command-based communication interfaces. It offers flexible connectivity options through UART or USB HCI controller interfaces and enables secondary development via the QuecOpen® solution. HCM320Z supports multiple data rate modes, including 1 Mbps/ 2 Mbps/ 3 Mbps in BR/EDR mode and 1 Mbps/2 Mbps in

ESP32-H4 supports all Bluetooth 5.4 (LE) features and is certified for Bluetooth 6.0, marking a key milestone for Espressif. Built on a dual-core 32-bit RISC-V MCU (up to 96 MHz), it integrates Bluetooth 5.4 (LE) and IEEE 802.15.4, supporting Thread, Zigbee, Matter, and Bluetooth Mesh. With BLE Audio, ESP32-H4 enables new use cases in wireless

Solved is not the same as optimised. Every engineer knows this.Not every engineer applies it to the circuits they stopped thinking about. The transistor. The flyback diode. The base-emitter resistors.Passed down through reference designs.Proven. Unquestioned. The circuit was correct. The component count was a habit. The BST62 is what happens when someone finally optimises one.PNP

The K78XXJT-500R3 delivers high-efficiency power in an ultra-low profile for loT and industrial sensors. Key Features

The RFM92LR is a low-power LoRa module based on the LR1121 chip, this module is designed for wide-area loT and satellite communication scenarios, and features targeted optimizations in frequency band support, power consumption control, and communication flexibility. Key Features In terms of power consumption, the RFM92LR can flexibly adjust the transmit power (13dBm, 14dBm, and

Core Memory Clock system Power management and reset General purpose input and output (I/O) Timer Communication interface Hardware CRC-32 moduleTwo comparatorsUnique UIDSerial wire debug (SWD)Working temp. : -40 ~ 85 ℃, -40~105℃Package: QFN20, TSSOP20, SOP20, QFN16, SOP16, SOP14, SOP8 Volume Pricing: $0.12 based on MOQ=5k pcsPart number: PY32F002BW15S6 SOP16 package

The MEZS7-PDCharger-MP2761 is a solution module for dual-role port (DRP) applications using the MP2761 and MPF52002. The MP2761 is a 4V to 22V input voltage (VIN) buck-boost charger IC designed for battery packs with 2 cells to 4 cells in series. The MPF52002 is a highly integrated USB PD controller for DRP ports, with a

Powering modern applications requires high currents, precise transient control, and a flexible voltage set-up. In particular, field-programmable gate array (FPGA) power specifications often come with rigid requirements regarding output voltage (VOUT) accuracy, where the absolute VOUT accuracy must be around ±1.5%, regardless of temperature variations and aging. The MPM3695 family (MPM3695-10, MPM3695-20, MPM3695-25, and MPM3695-100)